Packs/Racks/Baskets

Seat Roll Asymmetrico takes everything we've learned in 5 years of producing the award-winning Seat Roll Premio and kicks it up a notch with lighter materials, reduced bulk, improved abrasion resistance, an extra pocket, and a unique asymmetric design which allows you to pack more into a smaller volume, oh, and room for up to 700x45 (29x1.75") tubes! - 2-Ply Ballistic Nylon Construction with Hypalon outer jacket - Boa L6 Closure System with Lace Guide - Padded Rail Guard protects saddle rails and speeds Installation - FOUR internal pockets: Holds tubes up to 700x45mm - Black reflective printing provide stealthy HI-VIS in low-light conditions - Weight: 85 grams

The Alternator Rack 190 is the rear rack solution for all Salsa 190mm-spaced Alternator dropout equipped frames. Load up your panniers, get off the beaten track, and start exploring! - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular AL-6061-T6 construction - 135 x 325mm cupped deck - Extra-long struts for improved range of fit. Straight and shaped (kinked) struts included - Large pannier hook stops - Black powdercoat finish - 15kg maximum recommended load - Mounting kit included - 765g

The Alternator 135 Low Deck fits Salsa 135mm-spaced, Alternator dropout equipped frames using a non-plus-sized tire. It features a lower and narrower deck that fits better over and around tires up to 29 x 2.1" (without fenders), as well as 700c and fender setups. - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular 6061-T6 aluminum construction - 135 x 345mm cupped deck - Extra-long struts for improved range of fit; straight and shaped (kinked) struts included - Black powder coat finish - 765 grams - Weight Limit (lbs): 59.5 lbs.

Set out on an adventure with Salsa's Alternator Rear Rack. Built for 135mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.

Set out on an adventure with Salsa's Alternator Rack. Built for 170mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.

The Anything Bracket Pack is specifically designed for use with our Anything Bracket and Anything Bracket Mini, but you can also strap it around your seat rails and use it as a seat bag to hold a tube, CO2, multi-tool, or anything else you want to stash in there. - Constructed of 200D nylon - Mounts to Anything Bracket, Anything Bracket Mini or saddle rails - Roll-top closure - Includes strap - Weight: 50g

Designed with minimalist riding in mind, the Anything Bracket mounts to standard or Three-Pack frame bosses and works directly with the Anything Pack, allowing you to carry essential items on the bike. - Combines placement of the Anything Pack and standard water bottle cage in a single location - Mounts to standard or Three-Pack bosses on forks and frames - Bracket is constructed of lightweight 6061-T6 aluminum - Includes Anything Pack, mounting hardware and strap - Anything Pack features a roll-top closure for easy access

• Tubular 6061-T6 aluminum construction • Three-position mid-blade mount for improved fit • Large pannier hook stops • Powdercoat finish • Maximum recommended load 33lbs (15kg) • Requires inner and outer mid-blade eyelets

The Down Under HD Rack is the recommended lowrider for world touring. Sturdy and dependable, the steel construction lends itself well to field repairs should a worst-case scenario occur. - Requires dual-sided, mid-blade mounts - Wide crossbars provide sturdy, secure attachment points for a pannier - Tubular 4130 CroMoly construction - Mounting system provides 35mm range of infinite adjustment to position the rack - Includes mounting hardware kit - Powdercoat finish - Maximum Recommended Load: 55lbs (25kg) - Sold in pairs - Requires inner and outer mid-blade eyelets

The Salsa EXP Series 35.0 Anything Cradle Arms are for mounting the Salsa EXP Series Anything Cradle (sold separately) to handlebars with a 35.0mm or 31.8mm clamp diameter. - Compatible with 35.0mm bars or 31.8mm bars (with included shims) - Compatible with all Salsa EXP Series Anything Cradles - Hinged clamps allow for easy installation and removal from handlebars - Made of 6061 forged aluminum

The Salsa EXP Series Anything Cage Bag is designed to hold your gear on the Salsa Anything Cage and Anything Cage HD mounting systems. This bag protects contents from the elements while keeping weight low to the ground. - Designed to fit Salsa Anything Cage and Anything Cage HD (sold separately) - Quick-release roll-top closure for easy accessibility - Two Hypalon daisy chains for multiple secure attachment points - Molded TPU base helps keep bag upright even when off the bike - Primary Material: 400D Nylon with TPU Base - Weight: 128g

The Salsa EXP Series Anything Cradle is a bracket-mount handlebar roll system that holds gear in front of your handlebars without kinking your cables. This modular system is designed for use with our EXP Series Side-Load or Top-Load Dry Bags, or you can use your own dry bag. The Anything Cradle allows you to distribute your gear evenly, which is essential to any well-balanced bikepacking setup. - Includes Anything Cradle and two 30" Salsa EXP Series Rubber Straps - Salsa EXP Series Rubber Straps are made of non-slip TPU to hold gear securely - Anything Cradle Arms are compatible with 35.0mm handlebars or 31.8mm handlebars (with included shim) - Nylon 6/6 composite cradle, 6061 forged aluminum arms - Maximum load weight: 8 lbs. (3.6kg)

The Salsa EXP Series Anything Cradle is a bracket-mount handlebar roll system that holds gear in front of your handlebars without kinking your cables. This modular system is designed around our EXP Series Side-Load Dry Bag, which maintains a fixed height for loading with ease, or you can use your own dry bag. The Anything Cradle allows you to distribute your gear evenly—an essential part of any well-balanced bikepacking setup. - Kit includes Anything Cradle, Side-Load Dry Bag, EXP Series Front Pouch, and two 30" Salsa EXP Series Rubber Straps - EXP Series Anything Cradle Side-Load Dry Bag is fixed-height for easy loading - Salsa EXP Series Rubber Straps are made of non-slip TPU to hold gear securely - Works with or without EXP Series Anything Cradle Front Pouch - Anything Cradle Dry Bags feature a welded seam construction with waterproof materials and hook-and-loop straps for easier installation - Anything Cradle Front Pouch uses water-resistant fabric with welded seams for weather protection - Anything Cradle Arms are compatible with 35.0mm handlebars or 31.8mm handlebars (with included shim) - Nylon 6/6 composite cradle, 6061 forged aluminum arms - Maximum load weight: 8 lbs. (3.6kg)

The Salsa EXP Series Anything Cradle is a bracket-mount handlebar roll system that holds gear in front of your handlebars without kinking your cables. This modular system is designed around our EXP Series Top-Load Dry Bag, which maintains a fixed width for loading with ease, or you can use your own dry bag. The Anything Cradle allows you to distribute your gear evenly—an essential part of any well-balanced bikepacking setup. - Kit includes Anything Cradle, Top-Load Dry Bag, EXP Series Front Pouch, and two 30" Salsa EXP Series Rubber Straps - EXP Series Anything Cradle Top-Load Dry Bag is fixed-width for easy loading - Salsa EXP Series Rubber Straps are made of non-slip TPU to hold gear securely - Works with or without EXP Series Anything Cradle Front Pouch - Anything Cradle Dry Bags feature a welded seam construction with waterproof materials and hook-and-loop straps for easier installation - Anything Cradle Front Pouch uses water-resistant fabric with welded seams for weather protection - Anything Cradle Arms are compatible with 35.0mm handlebars or 31.8mm handlebars (with included shim) - Nylon 6/6 composite cradle, 6061 forged aluminum arms - Maximum load weight: 8 lbs. (3.6kg)

The EXP Series Frame pack creates storage capacity in the main triangle of your frame, keeping weight centered, and gear out of the way of off-road obstacles. It's built with extremely durable fabric and zippers, and the result will see you through many miles, and many adventures. This frame pack is designed to fit the Cutthroat frame perfectly. - Weather resistant with fully welded-in #10 YKK waterproof zippers - Internal hook and loop divider for separating gear and managing storage - D-ring to keep water bladder from compressing itself in the bottom of the bag - Exit port along downtube for use with water bladder or lights - Non-driveside flat pocket for storage of maps, tools, phones, wallet, etc. - 500D Nylon with TPU lamination and PU coating, 1000D Polyester with dual sided TPU lamination, #10 waterproof YKK Zippers, Duraflex Hardware - XL Weight: 360g; Volume: 6.1L - L Weight: 320g; Volume: 5.2L - M Weight: 300g; Volume: 4.5L - S Weight: 260g; Volume: 3.5L

The EXP Series Direct Mount Thumb Screws allow for quick and easy attachment of Salsa EXP Series Direct Mount Packs to bicycle frames equipped with direct-mount locations. - Can be installed and removed by hand or with allen key - Includes necessary 0.5 mm washers and 4 mm spacers - Sold in packages of two

The EXP Series Fat Framepack creates storage capacity in the main triangle of your frame, keeping weight centered, and gear out of the way of off-road obstacles. It's built with extremely durable fabric and zippers, and the result will see you through many miles, and many adventures. - Weather resistant with fully welded-in #10 YKK waterproof zippers - Internal hook and loop divider for separating gear and managing storage - Exit port along downtube for use with water bladder or lights - Non-driveside flat pocket for storage of maps, tools, phones, wallet, etc. - Tapered at the front and along the bottom for maximum carrying capacity - Designed to fit: Mukluk Aluminum, Mukluk Carbon, Blackborow, and Blackborow V2

The Salsa EXP Series Anything Cradle Front Pouch makes it easy to access the gear you rely on throughout the day on a bikepacking adventure. This pouch features fully welded construction for day-in, day-out use, and a buckle attachment design that fully integrates with our EXP Series Anything Cradle and EXP Series Dry Bag. - Keeps your ride essentials in easy reach - Designed for use with our EXP Series Anything Cradle and EXP Series Dry Bag system - Extremely weather-resistant welded design

The EXP Series Full Suspension Framepacks create storage capacity in the main triangle of your frame, keeping weight centered, and gear out of the way of off-road obstacles. They’re built with extremely durable fabric and zippers, and the result will see you through many miles, and many adventures. These framepacks are designed to fit specific Salsa suspension frames perfectly. Check the EXP Framepack Sizing Chart for fit information. - Single compartment for larger items with driveside opening - Sewn-in zipper for long-lasting durability and easy-to-use loop zipper closure - Built with materials to help maintain the pack shape and to prevent billowing - Waterproof fabrics and water-resistant construction - Padded in key areas to protect contents - NOTE: Designed for the V3 (2019) Spearfish and Horsethief. This bag does not fit previous generation Spearfish and Horsethief models.

The EXP Series Full Suspension Framepacks create storage capacity in the main triangle of your frame, keeping weight centered, and gear out of the way of off-road obstacles. They’re built with extremely durable fabric and zippers, and the result will see you through many miles, and many adventures. These framepacks are designed to fit specific Salsa suspension frames perfectly. Check the EXP Framepack Sizing Chart for fit information. - Single compartment for larger items with driveside opening - Sewn-in zipper for long-lasting durability and easy-to-use loop zipper closure - Built with materials to help maintain the pack shape and to prevent billowing - Waterproof fabrics and water-resistant construction - Padded in key areas to protect contents - NOTE: Designed for the V3 (2019) Spearfish and Horsethief. This bag does not fit previous generation Spearfish and Horsethief models.

The EXP Series Full Suspension Framepacks create storage capacity in the main triangle of your frame, keeping weight centered, and gear out of the way of off-road obstacles. They’re built with extremely durable fabric and zippers, and the result will see you through many miles and many adventures. These framepacks are designed to fit specific Salsa suspension frames perfectly. Check the EXP Framepack Sizing Chart for fit information. - Single compartment for larger items with driveside opening - Sewn-in zipper for long-lasting durability and easy-to-use loop zipper closure - Built with materials to help maintain the pack shape and to prevent billowing - Waterproof fabrics and water-resistant construction - Padded in key areas to protect contents - NOTE: Designed for the V3 (2019) Spearfish and Horsethief. This bag does not fit previous generation Spearfish and Horsethief models.

The Salsa EXP Series Rubber Strap is a strong, adjustable strap that holds your gear securely to Salsa Anything Cages, Anything Cradles, or racks. Use them anywhere you need to secure a load on your bike. - UV- and weather-resistant - Includes band to keep excess strap out of the way - 22" length is best for use with Salsa Anything Cage and Anything Cage HD - 30" length is best for use with Salsa Anything Cradle - Sold in pairs

The Timberjack Kids Framepack is the ultimate place for your young adventure junkie to stash their stuff. Whether filled with gear or treasures, this pack is the perfect compliment to every young heart’s desire to explore. - Constructed of rugged 600D PU coated Poly fabric, with Velcro strap attachments for a secure fit - Non-zipper bag opening uses Velcro closure with glove-friendly tab for easy access - Designed specifically to fit the Salsa Timberjack 24 kids bikes

Load up and go! Salsa's Wanderlust HD Rear Rack is built from chromoly steel for real-world strength. A large deck teams up with multiple cross bars for securing panniers and other gear. To get you going, a mounting kit is included, and to help you stay visible, there's also a taillight mounting bracket.

This carbon Mukluk specific frame bag incorporates the best features of our classic Ranger frame bag. This frame bag is for the 2017-2021 year models of the Salsa carbon Mukluk. Your frame size correlates to the frame bag size; a small fits a small carbon Mukluk. If you have an aluminum Mukluk, we recommend the Ranger. Features: - Revelate exclusive RevX-PAC panels that are 2 times as abrasion resistant as standard VX material. - Zipstretch construction pairs a bomber, wetsuit style molded-tooth zipper with our exclusive stretch Cordura panels that reduce zipper stress when closing bag. - Industry leading #10 Molded tooth zippers with urethane coated tape are basically impervious to dirt and grit that destroy more commonly used water resistant coil zippers. - Exit port in main compartment for hydration tube or wires. - Zippered left side pocket on sizes SM-XL. - Bags feature one main compartment with vertical divider. - Expanding taper front section for increased volume at head tube. - Stretch mesh internal pocket. - Front top tube attachments accommodate top tube packs. Weight: - SM: 11 oz - MD: 12 oz - LG: 13 oz - XL: 15 oz Materials: - RevX-Pac Fabric: Dimension Polyant VX-21 with proprietary abrasion resistant finish; 1050 denier domestic ballistics nylon; 420 denier diamond ripstop lining; closed cell foam padded tube sections. Made in the USA with domestic and imported materials. These frame bags are manufactured and distributed by Revelate Designs and have no affiliation with Salsa Cycles. Salsa Cycles is a trademark of Quality Bicycle Products.

Designed to fit the M and H style Brompton handlebars, the 1.2 Litre City Bar Bag is made from tough fabrics and is tape sealed - making it completely waterproof. Perfect for carrying keys, phone, and wallet. Handmade in our Yorkshire workshop, all bags are finished with the classic Restrap label, made from vegan-friendly PU. Weight - 90g Capacity - 1.2L - Bags designed specifically for use on folding bicycles - 100% handmade in Yorkshire England from vegan-friendly PU - Third-party online sales are strictly prohibited by the manufacturer All Restrap products carry a lifetime guarantee to be free of defects in materials and workmanship. We stand by our products and will cover the cost to repair or replace any defective product.

The City Saddle bag is designed for any folding bicycle. Constructed from waterproof fabrics, it comes in two sizes to accommodate a range of gear like clothing, off-the-bike footwear, or tools. Both sizes are tape-sealed and completely waterproof. The bag also features an extendable bottom stabilising strap which fits easily around the suspension block on all Brompton bicycles. Handmade in our Yorkshire workshop, all bags are finished with the classic Restrap label, made from vegan-friendly PU. Weight - 110g Capacity - 1.2L - Bags designed specifically for use on folding bicycles - 100% handmade in Yorkshire England from vegan-friendly PU - Third-party online sales are strictly prohibited by the manufacturer All Restrap products carry a lifetime guarantee to be free of defects in materials and workmanship. We stand by our products and will cover the cost to repair or replace any defective product.

The 1 Litre City Stem Bag fits any folding bicycle. Made from tough waterproof fabrics, it provides a simple solution for carrying a water bottle, snacks, or other accessories. The bag moves with the stem and does not impact the folding mechanism of the bike. Handmade in our Yorkshire workshop, all bags are finished with the classic Restrap label, and made from vegan-friendly PU. Weight - 96g Capacity - 1L - Bags designed specifically for use on folding bicycles - 100% handmade in Yorkshire England from vegan-friendly PU - Third-party online sales are strictly prohibited by the manufacturer All Restrap products carry a lifetime guarantee to be free of defects in materials and workmanship. We stand by our products and will cover the cost to repair or replace any defective product.

The Restrap Full Frame Bag allows you to easily increase the load out you carry for comfortable bikepacking and touring. The bags come in three sizes, designed to fit most standard frames and geometries. Two Aquaguard YKK zips on the drive side of the bag allow easy access to the top and bottom sections of the bag, with internal velcro dividers to separate the compartments. These dividers aid the structure of the bag when fully packed, but also fold away to allow use of the full internal space of the bag if needed. The non-drive-side of the bag contains a document pocket, useful for storing smaller items. The bag is made from durable, textured nylon outer and VX21 fabrics, with a wipeable lower section that means the bag is easy to keep clean when riding off-road or in adverse weather. Rubberized strapping provides extra grip to the frame and webbing straps, with easy-to-use cam locking buckles, keep the bag sitting securely and free of movement while riding. Handmade in our Yorkshire workshop, all bags are finished with the classic Restrap label, made from vegan-friendly PU. Weight - 275g / 322g / 368g (small/medium/large) Capacity - 6L / 7.5L / 9L (small/medium/large) - Body is made out of 1000D Textured Nylon & VX21 fabrics - 100% handmade in Yorkshire, England - Third-party online sales are strictly prohibited by the manufacturer All Restrap products carry a lifetime guarantee to be free of defects in materials and workmanship. We stand by our products and will cover the cost to repair or replace any defective product.

The Adventure Race Bar Bag is the ideal handlebar storage solution for ultra-distance riding, audaxes, and races. The minimalist hardshell holster is constructed with a WX21 technical outer and durable nylon inner lining with Hypalon accents. The holster is shaped to optimize performance, whilst keeping weight to a minimum. Foam spacers and spring-loaded cam locks provide an easy and reliable attachment to your handlebars, whilst a reflective elastic cord retention strap aids stability around the head tube. A 100% waterproof 7L Dry Pack has been designed specifically for the Race Bar Bag, featuring a roll-top closure, reflective detailing, and stretch mesh side pockets that provide accessible storage for food, gloves, and other essentials on the go. Capacity - 7L Weight - 320g - A mini D-lock holster sits between the two compartments - 100% waterproof - Third-party online sales are strictly prohibited by the manufacturer All Restrap products carry a lifetime guarantee to be free of defects in materials and workmanship. We stand by our products and will cover the cost to repair or replace any defective product.

The Adventure Race Stem Bag offers a highly adjustable and accessible storage solution for nutrition, tech, clothing, and more. Multiple Hypalon MOLLE mounts and double-sided velcro loops deliver a huge array of mounting possibilities. Our innovative, single-pull drawcord closure, allows for effortless one-handed access into the bag when on the move. One upward pull on the Hypalon tab or shock cord opens or closes the bag respectively, whilst the internal stiffener aids easy access and helps the durable and waterproof VX21 outer hold its shape Stretch mesh pockets offer additional external storage and an extendable nylon interior provides the option to boost the internal capacity when resupplying for the next leg of your journey. Both the shock cord and our signature Race Range heat-pressed logo are reflective, assisting visibility in low-light conditions and at night. Capacity - 1.1L Weight - 86g - Attaches to stem and handlebar with nylon straps - Made of X21, a technical waterproof fabric with waterproof zippers - 100% handmade in Yorkshire, England All Restrap products carry a lifetime guarantee to be free of defects in materials and workmanship. We stand by our products and will cover the cost to repair or replace any defective product.

The Rear Top Tube Bag is the perfect add-on to maximize storage on your bike when frame space is limited, all other attachment points have been used or you want to organize tools, spares, food, or other accessories into a separate compartment. A simple zip closure allows for easy one-handed access. Hypalon MOLLE accents on the base and rear of the bag each provide two placements for the double-sided velcro straps, allowing you to tailor the bag to be ideal for your setup. Handmade in our Yorkshire workshop from 100% waterproof textured nylon, with a nylon lining and finished with the classic vegan-friendly PU leather Restrap label. Weight - 65g Capacity - 1L - 100% handmade in Yorkshire, England - Capacity: 61 cu in (1L) - Weight: 70g All Restrap products carry a lifetime guarantee to be free of defects in materials and workmanship. We stand by our products and will cover the cost to repair or replace any defective product.

When a backpack is too bulky for that quick lap but your pockets just won't do the job, the Stash Quick Rip hip bag is the perfect solution. It's the perfect size for water, nutrition, and spares and it won't get in your way. - Construction: Ripstop nylon, 3D mesh backing, stretch belt - Waterproofing: Waterproof zippers - Adjustment: Single sided stretch belt adjustment - Pockets: 2 pockets + phone pocket - Hydration Capacity: Neoprene bottle holder - Reflective logo, lower carrying straps

Free Your Pockets Why carry your tools yourself? Strap them to your bike and forget about them until you actually need them. Enough room for a CO2 cartridge, a small selection of tools + tire levers, and a spare tube. - Stretch hook-and-loop strap adjustment - Ripstop nylon construction - Printed silicone grip - Tri-fold design - 3 inner pockets

Shield nutrition from the wind with this E-pack storage system that mounts directly behind the stem. Its streamlined design improves airflow from stem to bike frame to improve overall aerodynamics when riding. - Bolt-on compatibility with TT frames. Can also be mounted with Velcro straps (not included) - Injected Nylon and Glass Fiber with foam base - Slotted mounting for fore/aft adjustment - Dimensions: 210mm x 40mm x 57mm - Includes FPS (Frame Protection Strips) to protect the frame when installing with cable ties - Weight: 161g

The ATTK-S Soft-Side Top Tube Bag offers high-quality construction and a range of options for mounting. It offers easier access than hard-sided top tube boxes through more flexible materials and a splash-proof double zipper. It is a versatile addition for any cycling discipline when you want to carry items on the bike instead of in your pockets. - Splash-proof zipper - Waterproof fabric - Front strap attachment - Anti-Slip base - Can be mounted with straps or direct mount - Dimensions & Spec / Capacity: 264mm x 73.5mm x 40mm / 383ml - Top Tube Compatibility: Direct mount (M5 Bolt) or Velcro - Weight: 43g

- Tool Carrier - Sleek tool holder designed to securely hold the Park Tool MTB-5 Multi-Tool and TPT-1 Tubeless Tire Plug Tool - Can be mounted or strapped to most bike frames (hardware not included)

The Portland Design Works Bindle Rack is a seatpost-mounted rack designed to easily haul your gear on multi-day cycling tours or just across town. The rack is constructed of lightweight alloy and mounts to any size seatpost in seconds. Heavy-duty compression straps loop through saddle rails to carry your cargo. The Bindle Rack helps to prevent side-to-side sway while riding and rear wheel rub for riders with short seat posts. Place your tent, sleeping bag, drybag, or other gear directly onto the Rack platform and pull the compression straps tight to secure the load up against the bottom of your saddle. - Rack mount fits seatposts with diameters 22.0 - 31.6mm - Rack deck measures 133 x 343mm (5.25 x 13.5") - Total Rack length: 432 mm (17") - Rack weight: .35kg (13 ounces) - Rated to 5.34kg - Lifetime PDWarranty

PDW Bodega Basket features all-aluminum construction for all-weather durability. Easy-to-use Klickfix bracket securely holds rack to handlebars and allows easy removal for shopping. - Integrated lock holder

Strong and svelte, the Everyday Rack from Portland Design Works mounts to frames with or without eyelets and will fit around wheels and tires up to 29x2.4". The handsome bamboo platform is slightly tapered, giving the Everyday Rack a light, racy feel that looks great on a wide range of frame styles. The lower mounting bars allow panniers' center of gravity to be closer in line with your wheel, improving rear-end stability even when hauling heavy loads. Additionally, it means the platform is easily utilized, even when riding with two panniers. The Everyday Rack is crafted from durable alloy tubing, may be mounted to a rear wheel skewer, includes a tail light mounting point and solid, adjustable attachment arms. It's a breeze to install, so you'll be pedaling cargo in no time. Rated for up to 25 kgs (55 lbs). - Strong alloy tubing - Double ply bamboo deck - Deck measures: 209 x 76 mm (8.25 x 3") - Height: 419 mm (16.5") - Weight: 1.6 lbs  - Max Load: 25 kgs (55 lbs) - Lifetime PDWarranty

The PDW Gear Belly is a super-stable and easily accessible way to carry gear up front. The sturdy handlebar mounting bracket is designed and manufactured in Germany by Rixen & Kaul and is compatible with 22.0 – 31.8mm straight, riser or flared drop handlebars. Two interior straps hold gear into place. Three exterior straps cinch the Gear Belly nice and tight. All buckles feature cam locks to insure that cargo is extra-secure. A double ended waterproof dry bag is included with every Gear Belly and makes for the perfect fit. Exterior daisy chains create space for last-minute attachments. The sturdy and flexible exterior of the Gear Belly is finished with an easy-to-clean black tarpaulin, so go on and head into the muddiest of adventures! Rated for up to 7kg/15lbs of cargo. - Waterproof roll top drybag straps to handlebar harness - Fits 22.0 – 31.8mm handlebars - Opening at both ends for easier gear access - Durable and abrasion-resistant tarpaulin exterior - Daisy chain for last minute attachments - 15lb load limit

The PDW Outpost Mount allows you to attach a handlebar-mounted headlight to the side of your tapered wire basket—eliminating the problem of basket cargo blocking the light beam. The attachment plate compensates for the angle of a tapered wire basket, allowing the headlight to stay nice and level. - 32mm diameter clamping area for lights - Attaches with two M5 bolts and a steel backing plate - Mounts on left or right side

The Takeout Basket conveniently carries a six-pack, five burritos, eight chinchillas, or extra layers. - Features integrated U-lock carrying slot - Side eyelet for mounting a front light - Fits 25.4 – 31.8mm handlebars - Load Limit: 12lbs

Get it to go with Portland Design Works' Takeout Basket. This handsome rack attaches to your handlebars for easy access to the included waterproof, removable roll-top bag. The rack is made from light, sturdy aluminum tubing and includes thoughtful features like an eyelet for mounting a light and a slot for carrying your u-lock (both sold separately). - Conveniently carry a six pack of bottles, five burritos, three chinchillas or an extra layer of clothing - Fits 25.4 - 31.8mm handlebars (even fits between drop bars) - Includes water resistant roll top bag that clips securely into basket - Eyelet for attaching light mount - Integrated u-lock carrying slot - Rugged, lightweight 10 mm alloy tubes - Rack weight: 500 grams - Inside of basket dimensions: 155mm x 255mm x 105mm - Lifetime PDWarranty

What should you do with all those small, but important extras on your bikepacking tour? The best place to put your snacks, smartphone, rain slicker, and other items is in your ORTLIEB Accessory-Pack. This convenient volume expander for your Handlebar-Pack keeps your things secure, absolutely waterproof, and quickly accessible at all times. Use the metal hooks to securely attach the Accessory-Pack to the four points of attachment on the Handlebar-Pack. And if you don't plan on spending the night outdoors and don't need your Handlebar-Pack, you can still use your Accessory-Pack as a handlebar bag thanks to its pre-mounted Velcro straps. You can even use the carrying strap to transform the lightweight bag into a shoulder or hip bag.

The Back-Roller Free is based on the ever-popular Back-Roller Classic, which has proven itself millions of times. The Free line does not use PVC, but does not compromise on performance either. Through the use of robust polyester fabric, the waterproof rear pannier becomes a long-lasting companion while maintaining the same timeless tarpaulin look. And thanks to the hermetic roll-top closure, food and gear travels safely and protected from the elements. The Back-Roller Free is based on the ever-popular Back-Roller Classic, which has proven itself millions of times. The Free line does not use PVC, but does not compromise on performance either. Through the use of robust polyester fabric, the waterproof rear pannier becomes a long-lasting companion while maintaining the same timeless tarpaulin look. And thanks to the hermetic roll-top closure, food and gear travels safely and protected from the elements. A fixed inner pocket, consisting of a main compartment and a mesh pocket with a zipper, ensures order and overview. Matching accessories such as the Commuter Insert or Packing Cubes further expand the functionality of the Back-Roller Free. With the shoulder strap, the Back-Roller Free can be carried comfortably as a shoulder bag. The waterproof bike bag is PVC-free and sustainably made in Germany. FURTHER FEATURES: - reflectors on both sides of the bag - corner edge protection

The Back-Roller City is an economical starter version with clear features and plenty of space for bike touring. With its symmetrical design and slanted shape on both sides, this classic Ortlieb bag provides enough space for pedaling, while also allowing individual use on either the left or right side of the bike. The patented Ortlieb QL1 system allows fast and easy single-handed mounting and removal of the panniers, and is suitable for racks with a tube diameter up to 16 mm (hook inserts for diameters of 8 and 11mm are included). -Sold as a pair

Durable polyester fabric make this pannier a long lasting touring companion. The waterproof roll closure ensures safe and waterproof storage of food and equipment. With its QL2.1 fixing it is quickly mounted and taken off the bike rack. A shoulder strap provides carrying comfort when taken off the rack. - Classical rear pannier (pair) with roll closure - Sides of PS 490 nylon material, front and back of PD 620 - QL2.1 system for racks up to 16 mm - 20 mm hook available as separate accessory (e.g. for e-bikes) - Including reduction pieces for tube diameters 8, 10 and 12 mm; with anti-scratch function reducing abrasions on rack - Top QL hooks and lower sliding hook adjustable without requiring any tools - Lower hook rail made of two-component "hard-soft" synthetic reduces abrasions on carrier - Including integrated inner pocket and shoulder strap - Can be used individually (e.g. for shopping, sports, picknick) - Can be combined with the ORTLIEB Rack-Pack size S or M - Highly reflective Scotchlite reflector - Easy to clean inside - Optional accessories: ORTLIEB carrying system, outer pockets (size S), mesh pocket, bottle cage, 20 mm QL2.1 hook, anti-theft device long - Note: In order to meet standard IP64 (6=dustproof, 4=protected against splash water coming from all directions) the closure must be rolled 3-4 times.

In keeping with its commitment to innovation, Ortlieb has just introduced another PVC-free line of products made of a polyurethane-coated polyester fabric. The base fabric of the products in the Free Line is coated with polyurethane in a manner that ensures lasting waterproof qualities. The result is a waterproof and durable canvas material that is as outstanding as the conventional Ortlieb canvas material when it comes to durability and service life. The PVC-free version of the proven Ortlieb Back-Roller was developed for cyclists and outdoor enthusiasts who would like to avoid PVC entirely. This rear pannier bag with a roll closure offers ultimate practicality for all of your bike tours and weekly grocery-shopping ventures, especially on account of its generous payload. Thanks to its waterproof exterior, easy-to-clean interior and shoulder-bag function, the Back-Roller Free is ideal for all who would like to use their bikes despite having things to carry. With the Quick-Lock2.1 system, the bags attach to any bike rack with a tube diameter of up to 16 mm. Larger hooks (e.g. for e-bikes) are available separately. - Classical rear pannier (pair) with roll closure - Made of PVC-free, PU-laminated polyester fabric - QL2.1 system for racks up to 16 mm - 20 mm hook available as separate accessory (e.g. for e-bikes) - Including reduction pieces for tube diameters 8, 10 and 12 mm; with anti-scratch function reducing abrasions on rack - Top QL hooks and lower sliding hook adjustable without requiring any tools - Lower hook rail made of two-component "hard-soft" synthetic reduces abrasions on carrier - Including integrated inner pocket and shoulder strap - Can be used individually (e.g. for shopping, sports, picnic) - Can be combined on the rack with Ortlieb Rack-Pack size 24L or 31L - Simultaneous use of Ortlieb Travel-Biker possible - Highly reflective Scotchlite reflector - Easy to clean inside

A brilliant idea for all-season, all-weather riders: the bike bags in the Ortlieb High Visibility Line make it easier for other people to see you while you're out there on the streets. This is because all High Visibility bags not only come with reflectors, but are themselves one big reflector. The waterproof bags are made with a polyurethane-coated Cordura fabric that is woven through with a high-luminosity reflective yarn in neon yellow and black. That gives Ortlieb High Visibility bags an added safety feature in twilight conditions and in the dark of night. The Back-Roller High Visibility is the ideal bike bag for those who prefer the convenience of the roll closure system. The durable, waterproof, dustproof, abrasion-resistant and high quality fabric ensures optimal protection for your gear. Equipped with the sophisticated QL2.1 system with self-closing hooks, the Back-Roller attaches to your bike in a flash. And simply use the easily detachable shoulder strap to carry your bike bag comfortably once you've arrived at your destination. - Classical rear pannier (single bag) with roll closure in bright reflective color - QL2.1 mounting system for racks with max. 16 mm tube diameter - Reduction inserts for tube diameters 8, 10 or 12 mm with anti-scratch function preventing abrasion on the rack - 20 mm hook available as separate accessory (e.g. for E-bikes) - PVC-free reflective fabric - Increased visibility when hit by headlights due to highly visible reflective fabric in neon yellow and black - Including integrated inner pocket and shoulder strap - Can be used individually (e.g. for shopping, sports, picnic) - As a pair can be combined with the Ortlieb Rack-Pack size 24L or 31L on the rack - Comfortable to carry with shoulder strap (can be taken off) - Highly reflective 3M Scotchlite reflector - Can be easily cleaned inside

The multifunctional Urban Back-Roller is an ideal single bag for bike riders who are looking for a spacious, waterproof bike bag to accompany them on their way to work or school. Made of a special blend of Cordura fabrics, the bag has a textile appearance that is a perfect match for both casual and business attire. Thanks to a polyurethane coating on the inside, it is nonetheless absolutely waterproof. The practical QL mounting system enables you to quickly and conveniently attach the bag to your bike rack. The bag's internal pocket, consisting of a main compartment and a zippered mesh compartment helps you to keep things orderly and immediately accessible. A detachable shoulder strap allows you to comfortably carry the Urban Back-Roller once you set off on foot. - Classical rear pannier (single) with roll closure - Sturdy soft-touch PU-laminated Cordura blend - QL2.1 mounting system for racks with max. 16 mm tube diameter - 20 mm hook available as separate accessory (e.g. for E-bikes) - Reduction inserts for tube diameters 8, 10 or 12 mm with anti-scratch function preventing abrasion on the rack - Integrated inner pocket and shoulder strap - Hooks adjustable without requiring tools - Lower hook rail made of two-component hard-soft synthetic with anti-scratch function protecting the rack - Ideal for shopping, sports, picnic etc. - Two highly reflective 3M Scotchlite reflectors - Can be easily cleaned inside

Your spacious one-click shopping bag: the Bike-Shopper with QL2.1 system can be quickly attached to and removed from your rack. The flexible market and shopping bag remains stable – even on bumpy roads. The adjustable carrying straps allow it to be carried comfortably on your shoulder (adjusted by push buttons) and will not be in the way during biking. A waterproof Quick-Seal closure provides protection from the rain. Occasional use of ORTLIEB lubricant will keep the closure running smoothly. Further Features: - Internal valuables pocket in size DIN A4 - Padded carrying handle - Lateral 3M-Scotchlite reflectors Advice: Temperatures below -5°C/23°F may affect the function of the sealing lip!

Made of durable polyester fabric and long known as an ideal pannier for extended tours in any kind of weather, the spacious Bike Packer Classic is now available with the QL2.1 rack mounting system. The advantage of this faithful companion at your rear wheel: greater transport comfort, stability and safety. - Panniers (pair) with classic lid closure for large packing volume - Sides of PS 490 nylon material, front and back of PD 620 - QL2.1 mounting system for racks with max. 16 mm tube diameter - 20 mm hook available as separate accessory (e.g. for E-bikes) - Reduction inserts for tube diameters 8, 10 und 12 mm with anti-scratch function preventing abrasion on the rack - Hooks adjustable without requiring tools - Lower hook rail made of two-component hard-soft synthetic with anti-scratch function protecting the rack - Including integrated inner pocket and shoulder strap - Due to its symmetrical form it is possible to use only one bag on left or right side - The dust flap - with easily operable pull cord - under the lid provides protection e.g. against water, dust and snow - The edge protector prevents contact with spokes and abrasion - Simultaneous use of Ortlieb Travel-Biker possible - Highly reflective 3M Scotchlite reflector - Easy to clean inside

The perfect pair of bags for any adventure: you'll be astonished at how much gear fits in the Ortlieb Bike-Packer Plus! The classic flap closure is easy to operate and provides a maximum of stowage on top. The waterproof, three dimensional front compartment offers additional space for many of the small items you may need to access quickly while en route. The durable, high-quality Cordura fabric provides optimal protection against water, dust and abrasion. Thanks to the proven QL2.1 system with self-closing hooks, attaching the Bike-Packer Plus to your bike rack and removing it again is a matter of seconds. All of these features allow you to devote your attention to your tour and the beautiful sights to see along the way, no matter what the weather! - Pannier pair with lid closure and large packing volume - PU-laminated Cordura - QL2.1 mounting system for racks with max. 16 mm tube diameter - 20 mm hook available as separate accessory (e.g. for E-bikes) - Reduction inserts for tube diameters 8, 10 und 12 mm with anti-scratch function preventing abrasion on the rack - Hooks adjustable without requiring tools - Lower hook rail made of two-component hard-soft synthetic with anti-scratch function protecting the rack - Including integrated inner pocket and shoulder strap - Due to its symmetrical form it is possible to use only one bag on left or right side - The dust flap - with easily operable pull cord - under the lid provides protection e.g. against water, dust and snow - The edge protector prevents contact with spokes and abrasion - Simultaneous use of Ortlieb Travel-Biker possible - Highly reflective 3M Scotchlite reflector - Easy to clean inside

Plenty of space for your day at the office—no matter whether your office is in a meadow, a cafe or an old factory building on the other side of town. The Ortlieb Commuter Daypack City is a waterproof city backpack made of lightweight, durable nylon fabric. With its roll closure, its large main compartment, and its padded notebook compartment, it provides a secure place for your documents and other gear no matter what the weather. And thanks to its outstanding carrying comfort, it's always a pleasant companion to take along. Further features: - Reinforced underside - Air-permeable shoulder straps - Back padding with ventilation channels - Removable breast and waist straps - Zippered front pocket (not waterproof) - Loops for rear light and U-lock - Reflective yarn and reflective logo for more protection at night - Dimension notebook compartment: 39cm x 27cm x 2.5cm / 15.4" x 10.6" x 1"

If you use an ORTLIEB Back-Roller, Bike-Packer, or Velo-Shopper for your ride to work, you may want to consider the advantages of the Commuter Insert. You pack the Commuter Insert at home – with your laptop, lunchbox, documents, water bottle, pens, smartphone, change of shoes, etc. – and then simply insert it into your pannier. The advantage is that everything stays well-organized, nothing goes mysteriously missing and nothing hides in the depths of your bag. And so you save time and avoid those nervous moments of uncertainty. While the Commuter Insert is ideal for commuters, it can also be a faithful companion to anyone who transports gear from any point A to any point B. The Commuter Insert is made of lightweight, durable nylon fabric. A padded compartment for your laptop or tablet is located directly under the handle. There is a separate pen compartment and two compartments for your smartphone and money, including an integrated key chain. The large inside compartment offers plenty of space for provisions and a change of clothes. FEATURES: - Stable and tip-resistant even when empty - Two side mounts for water bottles, etc. - Flat mesh pocket (ideal for a bike lock) - Foam padding on the sides and bottom - Ideal for use with all ORTLIEB Back-Rollers, Bike-Packers and Velo-Shoppers - Permits access to the inside pocket of your bike pannier

Many e-bike owners are well-acquainted with this problem: bags and baskets that can't be attached to the handlebar because the e-bike display is in the middle of the handlebar. The ORTLIEB E-Bike Mounting Set comes to your assistance without forcing you to relocate the display. The lockable adapter is mounted to the handlebars with the proven cable fastener. This gives you a theft-proof way of attaching your ORTLIEB handlebar bags and baskets despite the display. The fastener is made for attachments of up to 5 kg. - suitable for all handlebar diameters up to 35 mm - duplicate set of keys - mount compatible with products by Rixen&Kaul (KLICKfix System) - bags can be locked to the handlebar with the integrated lock - additional safety in traffic thanks to the reflective material on the mount block

An updated Trunk Bag design for more than just e-bikes. Complete with a magnetic flap closure for easy one-handed opening and closing, and features the Top Lock mounting system for quick installation and removal from your rack's deck.

If you have unconventional handlebars (sold separately) but still want a bag with easy access when riding then pick up Ortlieb's Extension Mounting Set for the Ultimate5 handlebar bag (sold separately). It pushes the bag out front further than normal so you can still use your fun hand positions and enjoy the convenience of a handlebar bag.

Weighing just 290 grams (including adapter), the fork pack offers approximately 4.1 liters of additional storage space for bike packing. With the help of the QLS adapter, this ultra-light bag with roll closure can be mounted on forks with eyelets or cage mounts intended for this purpose, as well as on forks without cage mounts, as long as the fork blades sport a constant diameter of 30mm to 42mm. Specifications: - Ultralight, waterproof bag (single pocket) with roll closure - The Fork-Pack is primarily designed for attachment to bicycle forks, but it can be mounted on non-tapered vertical tubes with a consistent diameter, e.g. Kick Style Scooters - Abrasion-resistant PU-coated nylon fabric - Allows additional luggage to be carried on bikes using the Quick-Lock S (QLS) adapter system - Adapter is compatible with forks with eyelets and tubes with constant diameter from 30 mm to 42 mm - The Quick-Lock S mounting bracket may be bolted directly to a fork with „braze-on“ eyelets or attached to vertical tubes using the supplied band-clamps - Ultra-fast installation, with one click the bag snaps in to place - The removal is just as fast, simply move the release lever and pull the bag upwards - The robust Quick-Lock S mounting plate remains mounted to the bicycle - Low profile locking elements ensure snag-free use - Internal stiffener - Reflective ORTLIEB logo - Maximum load 3kg / 6.6lbs