Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Tools
$132.99
With today’s lightweight components, torque wrench use in the shop is no longer an option — it’s a must for every mechanic. The TW-6.2 is a high-quality, ratcheting, click-type torque wrench that accurately measures and applies the proper amount of torque to a component’s threaded fastener(s). Designed for higher torque settings for repairs and installation in the bottom bracket, cassette lockring and other areas that use a higher torque settings. For lower torque setting, see the TW-5. Comes with its own protective case.
- 10–60 Newton meter range (88–530 Inch Pounds)
- Adjustable in 0.25 Nm increments
- Ratcheting 3/8" drive
- Reads and registers for both left hand and right hand threading
- Dial-adjust system allows desired torque setting to be preset
- Calibrated to be accurate to +/- 4%
- Length: 36.2cm (14.25")
$156.95
World-famous Park Tool quality wrapped up in a great set of metric combination wrenches. The MWR-SET includes 6mm to 17mm wrenches with a 12-point two-way ratcheting box end. Forged from chrome vanadium steel, chrome-plated, meticulously polished, then center dipped in Park Tool blue vinyl for a positive grip. Strong, comfortable, and beautiful!
- Includes 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, and 17mm wrenches
$126.40 - $202.18
Park Tool offers premium-quality reamers for nearly any bicycle standard. The reamers below are designed to quickly, accurately, and precisely ream headtubes when used with Park's Head Tube Reamer (HTR), ensuring a perfect headset fit and prfoessional-quality bicycle build. Choose the correct reamer for your application using the following information:
- 751.2: This reamer is sized to 30.1mm. This allows a 0.1mm interference fit when pressing the 30.2mm headset of the “Euro” one-inch standard.
- 754.2: This reamer is sized to 33.9mm. The allows a 0.1mm interference fit when pressing the 34.0mm headset of the 1-1/8" standard.
- 788: This reamer is sized to 43.95mm. It reams head tubes to accept “internal” headset cups with 44.05 - 44.10mm O.D. (1-1/8 ZS standard). It is used with Park Tool's 690-XL Facing Cutter and 750 Centering Cone.
- 738: This reamer is sized to 52.1mm. It is used to ream head tubes using the 1-1/2" integrated headset standard. It is used with Park Tool's 690-XL Facing Cutter and 750.2 Centering Cone Adapter.
- 789: This reamer is sized to 55.95mm. It is used to ream head tubes to accept “internal” headset cups with 56.00–56.10mm O.D. (1-1/2 ZS standard). It is used with Park Tool's 690-XXL Facing Cutter and #750 Centering Cone Adaptor.
- 799: This reamer is sized to 47mm. It is used for cutting the lower head tube on frames using an IS47 bearing for a 1-1/4" integrated headset. It cuts a 45-degree bearing set shoulder.
$199.95
A perfect way to start a bicycle tool collection! A great combination of tools to help a home mechanic clean, adjust, maintain, and do some basic repairs on their bike. The SK-4 includes more than 15 genuine Park Tool products that can perform dozens of tasks and includes a custom Park Tool toolbox with extra room for spare parts and more tools.
The SK-4 includes:
- AWS-10 Fold-Up Hex Wrench Set
- BBB-4 Big Blue Book of Bicycle Repair
- CC-3.2 Chain Checker
- CN-10 Professional Cable and Housing Cutter
- CT-5 Mini ChainBrute Chain Tool
- FR-5.2 Cassette Lockring Tool
- GSC-1 GearClean Brush
- HCW-16.3 Chain Whip/Pedal Wrench
- HR-8 8mm Hex Wrench
- MLP-1.2 Master Link Pliers
- SD-2 Shop Screwdriver: #2 Phillips
- SW-7.2 Triple Spoke Wrench
- TL-1.2 Tire Lever Set
- TWS-3 Torx Compatible 3-Way Wrench
$167.95
The 37-piece SBS-3 from Park Tool is a comprehensive, shop-quality set of sockets, hex bits, and Torx compatible drivers selected specifically to tackle a wide variety of common bike repair needs. The SBS-3 also includes flat-faced sockets in common sizes for work on suspension forks. Ideal for use with Park Tool torque wrenches, the 3/8" drive bits and sockets are forged from tough, chrome vanadium steel and nickel chrome plated for lasting durability.
$159.95
Designed and built specifically for a wide variety of bicycle hex work the THH-1 is a set of eight common sizes of professional quality T-Handle hex wrenches built for speed, efficiency, leverage and a perfect fit. Soon to become your favorite hex set, the THH-1 includes a handy tool holder that mounts to any vertical surface, including pegboard and solid surfaces (fasteners not included).
- Carefully selected combination of Chrome Vanadium and S-2 tool steels
- 2, 2.5, 3, 4, 5, 6, 8 and 10mm hex wrenches included
- Unique anodized aluminum Speed Spinner makes running long bolts in and out quick and effortless
- Machined, chamfered tips allow easier insertion into hex fittings
- Integrated “Strip-Gripper” twisted hex that makes removal of most bolts with stripped or over-sized hexes fast and easy
- Sliding T-handle creates increased leverage and multiple access positions
- Tool holder is included with the set and mounts to any wall, bench or tool box, perfectly positioning each wrench for easy access and storage
$134.95
Designed and built specifically for a wide variety of bicycle Torx compatible work, the THT-1 is a set of eight common sizes of professional quality T-Handle star-shaped wrenches built for speed, efficiency, leverage and a perfect fit. Soon to become your favorite Torx compatible set, the THT-1 includes a handy tool holder that mounts to any vertical surface, including pegboard and solid surfaces (fasteners not included).
- Carefully selected combination of Chrome Vanadium and S-2 tool steels
- T6, T8, T10, T15, T20, T25, T30 and T40 Torx compatible wrenches included
- Unique anodized aluminum Speed Spinner makes running long bolts in and out quick and effortless
- Sliding T-handle creates increased leverage and multiple access positions
- Tool holder is included with the set and mounts to any wall, bench or tool box, perfectly positioning each wrench for easy access and storage
$129.95
No more need to hold wheels between your knees, balance on a bench top or ask for help. The WH-1 Wheel Holder firmly holds thru axle and quick release wheels at three convenient positions. It’s like having a strong helper to hold wheels during cleaning, tire and tube work, hub work, cassette work, and tubeless installation. The WH-1 can be bolted or clamped directly to a bench or installed in a bench vise.
Uses and Features:
- Quick and easy access to hold virtually any wheel to perfectly position your work for a variety of tasks including but not limited to:
- Wheel building
-Cassette removal and installation
- Tire and tube removal and installation
- Tubeless tire work
- General cleaning
- Hub work
- Holds wheel at vertical, 35 degrees from vertical, and horizontal positions
- Accepts 12, 15, and 20mm thru axles and 5mm skewers
- E-Nickel finish for durability
$125.00
KMC's digital ChainChecker is the most accurate tool for checking your chain’s elongation.
- Measures up to 2.5mm elongation
- Fits all chains including 11 speed
- Handy electronic device
- Stainless hardened metal body
Previous page
Page 2 of 2