Brakes/Levers/Pads

The Magura MDR-P is a disc rotor for performance-oriented riders and tough tasks ranging from downhill and ebikes to heavy cargo bikes. It features Dovetail Interlink technology, a patented interlocking of the outer and inner rings. This provides additional support for the inner ring if the outer ring expands due to heat. In contrast to floating discs, the torque is transmitted to the dovetail-shaped toothing over its entire surface instead of just the rivets, increasing the rigidity of the brake disc and the degree of heat dissipation under continuous load. The MDR-P is the most powerful brake disc in the Magura portfolio, yet it still offers riders low weight and reduced vibration. - Perfect for demanding applications such as ebike or downhill riding - Two-piece design offers the highest level of heat dissipation and high torque transfer - Wear optimized ring design - Prepared for tone wheel or magnet

- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts

- Hinged 2 finger lever - Forged alloy construction - 2 piece hinged clamp - Compatible with caliper and U-brake applications - Fits 22.2mm (7/8") handlebars - 166g pair

Built around one of our original breakthrough designs, the Speed Dial 7 is the smooth and powerful way to control linear-pull or mechanical disc brakes. They are super easy to install and adjust so you can dial in the modulation just the way you like. - Compatible with mechanical disc brakes and linear-pull brakes. - Reach Adjust and Speed Dial Leverage Adjust - Reversible

- T100 Sintered Metallic: long-life, all-condition compound - T106 Semi Metallic: no-bed, shorter-life, quieter compound - Set includes one pair of pads with retention clip

These disc brake pads fit a variety of SRAM and Avid brakes and offer industry leading brake compounds for consistent, confident performance. - Low noise, high performance semi-metallic compound lasts longer than resin - Steel backing plate

- Designed for caliper and U-brakes - Forged alloy lever / 2-piece hinged aluminum bracket - 2 finger - 22.2mm (7/8") clamp - Return spring - 93g each

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

- Hayes service parts for calipers - Rebuild kits include: (2) caliper pistons with square profile seals, transfer port o-ring, and caliper bleeder with cap

Jagwire's Road Sport Brake Pads feature their tried-and-true Pro Series compound for excellent braking and durability. The pads are cartridge-style for easy replacement without losing your brake shoe position and there are wheels guides on the shoes to help when you're putting a wheel back on.

These adapter brackets are designed to work with the Post Mount style brake mounts.

Kool-Stop's E-Bike disc pads are produced with a ceramic barrier between the organic friction material and the steel backing plate to reduce heat transfer into the brake caliper causing brake fade. With the heavier design and quick speeds of Electric bikes, they require a compound that will hold up and provide consistent braking power. - Qty 1 = enough for 1 wheel

- High performance compounds recommended for all-conditions - Steel backing

Disc brake adaptors designed to mate Magura disc brakes with a variety of frame mounts and rotor sizes. - Includes hardware to mount adaptor to frame

The Odyssey Springfield brake features a one spring design to make brake installation and set up simple and easy. - For rear use only

- Lightweight 2-piece alloy cartridge design - Advanced alloy rim braking compound provides superior performance in both dry and wet conditions - Fully integrated angle adjustment - Automatic toe-in alignment - Length of Pad: 70mm - Pad Color: Black - Hardware Color: Black - Post Orientation: Offset

- Lightweight 2-piece alloy cartridge design - Advanced alloy rim braking compound provides superior performance in both dry and wet conditions - Fully integrated angle adjustment - Automatic toe-in alignment - Oversized tire deflector - Length of Pad: 55mm - Compound: All Weather

The Problem Solvers Double Barrel Brake Lever lets you operate 2 brakes with this one brake lever. It is made of light, durable aluminum with a steel clamp bolt and aluminum adjusting barrels.

Trying to get a little extra traction on shifters and brake levers has inspired home-brew mechanics to experiment with skateboard deck tape, hot glue, or slide on brake lever grips. Katie Compton actually went so far as to combine sand and superglue to ensure maximum grip in any conditions. While those solutions are pretty kick-ass, we try to make it a little easier with our Lever Grippies. Just stick ‘em on for more sticktion.

Shimano Altus BR-CT91 cantilever brakes offer confident and reliable braking at a convenient price point. - Brake Lever Actuation: Short Pull - Brake Mount Type: Canti Studs - Material: Aluminum - Pad Attachment Style: Threaded Post - Weight: 204g

- 107mm arch gives a better mud guard clearance - Updated rubber boots - Strong braking power with excellent braking control

Put supreme control right at your fingertips with Shimano's Deore Two-Finger V-Brake Levers. Ergonomic lever blades are comfortable and easy to use. The internal bumber offers silent lever return, and the reach can be adjusted to fit your hands.

Lock rings for all TRP Centerlock Rotors

Replacement hoods for your RRL levers.

Magura Caliper Cover Ring Kit

Cover kits for Magura brake levers.

Cover kits for Magura brake levers.

Clamps for mounting Magura disc brake levers to the bar. Does not include mounting hardware, clamp only. - Sold individually

Slip Avid's Shorty Brake Pad Inserts into your Shorty cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.

SRAM's Pad Inserts are the perfect upgrade for your brakes to deliver excellent stopping power and speed modulation. The secret is SwissStop's proprietary compound that resists heat buildup for a consistent grip without being "grabby." They have deep grooves to whisk away water so they're perfect for road and cyclocross alike.

- Aluminum pad holder with R55C4 pads

- Forged aluminum arms - 102mm arm length - 158g

Magura hose cover for mt brakes (sleeve nut)bag/10 - Small parts used to install hydraulic hose for Magura disc brakes.

Kool-Stop Ebike Compound Disc Brake Pads - Features a ceramic layered steel back plate and organic pad compound - Fits Avid XO Trail/Elixir 7/9 Trail and SRAM Guide Ultimate R/RS/RSC/T

Kool-Stop's E-Bike disc pads are produced with a ceramic barrier between the organic friction material and the steel backing plate to reduce heat transfer into the brake caliper causing brake fade. With the heavier design and quick speeds of Electric bikes, they require a compound that will hold up and provide consistant braking power. - Qty 1 = enough for 1 wheel

Kool-Stop's E-Bike disc pads are produced with a ceramic barrier between the organic friction material and the steel backing plate to reduce heat transfer into the brake caliper causing brake fade. With the heavier design and quick speeds of Electric bikes, they require a compound that will hold up and provide consistent braking power. - Qty 1 = enough for 1 wheel

Kool-Stop's E-Bike disc pads are produced with a ceramic barrier between the organic friction material and the steel backing plate to reduce heat transfer into the brake caliper causing brake fade. With the heavier design and quick speeds of Electric bikes, they require a compound that will hold up and provide consistent braking power. - Qty 1 = enough for 1 wheel

- High performance compounds recommended for all conditions - Steel backing

Kool-Stop's newest super lightweight anodized forged aluminum holder with their Thicker V2 Dual Compound insert pads installed. Features: - Curved Aluminum Holder - Integrated Pad-Lock Hardware - Secured Lock Pin - Thicker Pad for Longer Pad Life - Rim-Friendly Compound - Offset Post Compounds: - Dual: A fusion of Kool-Stop's black and salmon compounds which delivers superb braking in all-weather conditions. This combination produces a more controlled smooth stop! - Electric: Kool-Stop's E-bike compound is formulated specifically for the higher speeds and weights of electric bicycles. - Carbon 2: This compound works great on most carbon wheels and is designed to withstand those fast steep descents without a lot of pad wear. Specifications: - Weight per pair: 44.8 grams - Overall length: 72.5 mm - Pad contact width: 8.5 mm

Kool-Stop Ebike Compound Disc Brake Pads - Features a ceramic layered steel back plate and organic pad compound - Fits Shimano Saint BR-M810/820/8100/9120, BR-MT520/420, ZEE BR-M640 - Also compatible with Tektro Quadiem/Slate/G-Spec/Zurich and TRP G-Spec DH/DHR, Bengal Helix 4X

- High performance compounds recommended for all-conditions - Steel backing

- High performance compounds recommended for all-conditions - Steel backing

- Designed for linear pull & mechanical disc brakes - Aluminum construction - 2.5 finger - 22.2mm (7/8-inch) clamp - Left/Right: Right - Reach adjust and return spring - 88g each

Jagwire's Mountain Pro Brake Pads are a nice upgrade for your linear-pull and cantilever brakes. They feature cartridge-style pads that are easily replaced when the time comes. And the pads are made of Jagwire's tried-and-true all-weather compound for excellent stopping and durability.

Jagwire's Mountain Sport Disc Brake Pads (Hayes) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

Jagwire's Mountain Sport Disc Brake Pads (Tektro) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

Jagwire's Mountain Sport Disc Brake Pads (Formula) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

Jagwire's Mountain Sport Disc Brake Pads (Magura) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent brake performance and durability.

Jagwire's Mountain Sport Disc Brake Pads (Shimano) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

Jagwire Sport Semi-Metallic disc brake pads are a great improvement from OEM. They feature a high-performance semi-metallic compound that blends the low-noise of a resin pad with the durability of a metallic pad. Mounted to a steel backing plate, these are a great all-purpose pad.

These disc brake pads fit a variety of SRAM and Avid brakes and offer industry leading brake compounds for consistent, confident performance. - Low noise, high performance semi-metallic compound lasts longer than resin - Steel backing plate - Compatible with SRAM Code RSC (A1), Code R (B1), Guide RE; Avid Code (2011-2016)

The 1999 Sidepull Brake is a lightweight brake kit for BMX. - Includes brake, lever and cable - Reach is 66-90mm

Replacement brake hoods for Origin8 Classique Sport road levers

Make sure you have enough brake for where and how you ride. A larger rotor does a better job of displacing heat generated from braking and can provide better modulation. Origin-8's Torq-Lite Disc Adapter allows you to increase your braking power by giving you the option of upgrading from 160mm rotor to 180 or 203mm. • Used to upgrade the disc size on post mount calipers • Lightweight aluminum design

Suitable for moderate use applications - All-around performance in mixed weather conditions - Good performance at high or low temperatures - Great pad life - Quieter than sintered pads - Pad material: steel - Compound: semi-metallic - Compatibility: Avid BB5

Suitable for moderate use applications - All-around performance in mixed weather conditions - Good performance at high or low temperatures - Great pad life - Quieter than sintered pads - Pad material: steel - Compound: semi-metallic - Compatibility: Hayes CX5,GX2,MX2,MX3,MX4,MX5,SO1E / Promax DSK810

Suitable for moderate use applications - All-around performance in mixed weather conditions - Good performance at high or low temperatures - Great pad life - Quieter than sintered pads - Pad material: steel - Compound: semi-metallic - Compatibility: Hayes Stroker Ryde, Dyno

Suitable for moderate use applications - All-around performance in mixed weather conditions - Good performance at high or low temperatures - Great pad life - Quieter than sintered pads - Compatibility: Shimano Deore BR-M515,M525,M465,M475,M495,Nexave C501,C601,Acera BR-M415/Tektro Auriga & Auriga Comp HYD/RST D-POWER MECH - Pad Material: Steel - Compound: Semi-Metallic

Suitable for moderate use applications - All-around performance in mixed weather conditions - Good performance at high or low temperatures - Great pad life - Quieter than sintered pads - Material: Steel - Compound: Semi-Metallic - Compatibility: Shimano M900,M9020,M988,M985,M8000,M785,M675,M666,M615,R785,RS785,R515,R315,S700,CX75 FSA K-Force/Afterburner

Suitable for moderate use applications - All-around performance in mixed weather conditions - Good performance at high or low temperatures - Great pad life - Quieter than sintered pads - Pad Material: Steel - Compound: Semi-Metallic - Compatibility: Tektro IO/Novela pre-2010